COMPLETE SUPPLY

To guarantee its customers a better service, the company is closely following the details in all phases of processing chain, from sourcing of raw materials, to processing, to any treatments that have to be performed before the delivery of the finished product.

RAW MATERIAL
SUBCONTRACTED MATERIAL
SUPPLIES IN SALES ACCOUNT

The company own a warehouse of raw materials which are always available in order to ensure a timely response to the urgent needs of our customers. The availability of all types of material is guaranteed from a wide suppliers base.
The warehouse is equipped with a specific area reserved for the storage of our customers materials,  which is waiting to be processed. Aeronautical materials are stored in a dedicated area.
A code of internal order, the technical design of the product and the assignment of a working cycle, guarantee the traceability of the position of raw material.

We also have an automated vertical warehouse for the storage of finished products of our customers.

MAXIMUM SIZES IN MM PER TECHNIQUE

TURNING
MILLING UP TO 3, 4 AND 5 AXIS

TURNING N.1 DOOSAN PUMA LATHE 480 LM
capability : D=600; L=2000; BEZEL Ø FROM 50 TO 300

3 AXES: N. 1 MORI SEIKI NV 5000 PALLETIZED MACHINING CENTER
Capability: x=1000; y=510; z=510

4 AXES: N. 1 MORI SEIKI NV 5000 PALLETIZED MACHINING CENTER
Capability: X=1000; Y=510; Z=510; IV axis Ø 260

5 AXES: N.1 DECKEL MAHO 5 AXIS MACHINING CENTER
Capability: X=800; Y=700; Z=600; RPM=18000

EXTERNAL TREATMENTS

Brufani Precision Mechanics srl relies on external suppliers for the following operations:

– SURFACE TREATMENTS, Nadcap certified when needed galvanizing, anodizing, nickel plating, sandblasting, passivation, chromate, burnishing
– HEAT TREATMENTS hardening and tempering
– SPECIAL TREATMENTS Electron beam welding, Plasma spray HVOF coatings, Vacuum heat tratments and brazing (nadcap certified)
– INTERNAL/EXTERNAL GRINDING
– PAINTING/FINISHING
– NON-DESTRUCTIVE CONTROLS (metalloscope, magnetic inspection, liquid penetrant inspection)

COMPLIANCE AND QUALITY OF THE PRODUCT

The quality of the finished products is ensured by an accurate review, prior to our operators on the machines and then by our Quality Control officers through the procedures provided by certification ISO 9001:2008 e EN 9100:2009, specific for the aeronautical sector.

The Mitutoyo 3D measuring machine and all our monitoring tools present in our 3D control room (profile measuring machine, roughness machine, height measuring machine, profiles projector, Johnson pads, callipers and micrometers) are subject to periodic calibration and adjustment conducted by laboratories and SIT centers (Italian Calibration Service) which issue certificates of traceability as required by the Quality System. All our supplies are accompanied by conformity certificates which show the detected measurements and the instruments used.

Brufani Precision Mechanics is a certified company ISO 9001: 2008 and EN 9100: 2009. All our processes are realized according to the highest international quality standards.